How to Draw a Really Cool Dragon

Download Article

Download Article

Dragons are some of the most well-known mythical creatures, made famous from fairy tales and ancient legends. If you want to design a dragon on your own, first pick what type you want to draw. Western dragons expect similar to other lizards or dinosaurs with wings and are some of the most usually seen types in art. Eastern (Chinese or Japanese) dragons usually don't have wings and resemble a snake more a lizard. With a bit of practice and patience, you lot'll be able to draw any type of dragon!

Sentry our step by pace video hither!

1. 1

   Make a large and small circle next to one another for the front end and back of the body. Start by making a large circumvolve near the heart of your paper, using a compass if you lot want to go it perfectly circular. Then draw another circle that'south about 2-thirds of the size of the first ane to the left of it so there's a pocket-size gap between them. The larger circle will become the chest and shoulders of your dragon and the smaller one will be for the hips.^[one]

   • Don't overlap the circles or else your dragon'due south body will wait likewise brusk.
   • Your dragon volition look longer if yous put the 2nd circle farther away from the first i.
   • Exist careful not to draw the circles too large or else the rest of your dragon won't fit on the folio.

2. two

   Draw a smaller circle with a rounded trapezoid to make the dragon's head. Brand a circle that's well-nigh ane-tertiary of the size of the forepart of the body, and place it in a higher place the largest circle so there'southward a large gap between them. Where you draw the circle will determine how long your dragon's neck will exist. Add a small rounded trapezoid to the right side of the circle to give your dragon a snout.^[two]

   • Employ a compass to draw the circle if yous want information technology to look perfectly round. Otherwise, information technology'southward okay to describe information technology freehand.
   • Draw with light pencil lines and so you can erase and reposition the caput if you don't like where you drew it the first time.

   Advertisement

3. three

   Sketch curved lines connecting the head and trunk circles. First from the bottom of the head and describe a curved line that connects to the far correct side of the large circle. Then make another S-shaped line from the acme of the caput and then it intersects the tiptop of the large circle to consummate the neck. Add a curved line from the top of the big circumvolve to the elevation of the circle on the left. Brand the dragon's tum with another curved line that connects the lesser of the big circle to the lesser of the circumvolve on the left.^[3]

   • Avert using directly lines when you connect the circles since information technology will make the dragon look unnatural.

4. 4

   Put in lines for the legs then yous know what shape to make them. Start virtually the center of the largest circle and draw a straight line angled backward and so it extends past the bottom of the circle. And so add together a minor dot to the end of the line for the ankle joint earlier drawing some other straight line angled forward that's well-nigh one-fourth of the length of the first one. Attach a straight horizontal line for the dragon'south foot. Proceed adding lines for the legs on the forepart and back circles until your dragon has 4 legs.^[iv]

   • Some dragons may only have wings instead of front end legs. (Those dragons are called lindworms or wyverns.) If y'all don't want your dragon to accept front end legs, just leave them off.

5. 5

   Sketch out rounded tube shapes around the lines you drew for the legs to bulk them upwards. Start by drawing a curved line on either side of the leg lines you fabricated earlier. Make the legs so they're about the aforementioned thickness as the diameter of the caput. Keep the straight guide lines you drew in the middle of the curved lines to add muscles to your dragon'due south legs. Extend the legs downwards to the ankle joints yous drew at the bottom. Draw iii-four toes on each foot that cease in points to give your dragon some claws.^[5]

   • Yous tin also describe circles and ovals over your lines instead of tube shapes to make the musculature look more realistic.
   • Look at pictures of other lizards and reptiles to use as references for your dragon's anxiety since they may accept similar features.

6. half dozen

   Add a curved tail coming out from the dorsum of the trunk. Start from the summit of the medium-sized circle where the and draw a curved line going toward the left side of the folio. Make the line about the same length as the dragon'southward body before catastrophe information technology. And then describe a second curved line from the bottom of the circle that follows the curves of the first line. End the 2d line and so it forms a signal with the first one.^[6]

   • You lot can describe your dragon's tail as long as you want information technology.
   • Make the tail narrower every bit information technology gets closer to the tip and so it looks natural.

7. seven

   Sketch out curved lines for the shape of the dragon's wings. Offset the base of the fly at the top of the largest circle just behind the dragon'southward neck. Extend a curved line going back from the dragon'south neck and end the line when it's over the eye of the dragon's body. Then brand some other curved line going angled toward the head and stop information technology before it intersects the neck. Make a long curved horizontal line that ends in a higher place the tail to make the summit of the wing.^[7]

   • You lot can add spikes to the peak corner of your dragon's wings if y'all want.
   • You tin can make the wings larger or smaller if you want.

   Tip: The second fly will exist subconscious behind the ane that'due south in front, and then you don't demand to worry virtually drawing information technology if you don't want to.
   

8. viii

   Add the webbing to the wings to connect them to the body. Showtime from the tip of the wing that'south over the tail and brand a wavy line dorsum toward the center of the dragon's body. One time the line intersects the dragon's back, depict curved lines from the top corner of the wing so they extend to the wavy line you just drew to make the webbing.

   • Dragon wings traditionally look similar to those of a bat, and so you tin can use pictures of them as references for your cartoon.

9. 9

   Give your dragon features and horns on its head. First by cartoon modest circles for the eyes virtually the top of the head. Add a bumpy brow ridge to a higher place the eye to make your dragon look angry or menacing. Draw a line from the stop of the cage toward the center of the circle to add the mouth, and put a few pointed teeth coming out of the oral fissure. Then requite your dragon 2 curved horns coming off the back of its head to requite it more than character.^[eight]

   • Some dragons have ears that resemble their wings. If y'all desire to add ears, draw them straight below the horns.
   • The pupil in your dragon'south optics can be circular or wait like a slit.

10. ten

    Erase any lines yous fabricated that aren't a part of your dragon. Utilize your eraser to remove whatever marks you made that aren't a function of your dragon's trunk, such as the circles or lines in the middles of the legs. Work carefully so you don't erase whatsoever of the dragon's outline, or else you'll have to redraw sections. Wipe or blow abroad whatever eraser shavings to make clean off your paper.^[nine]

    • Use the eraser on your pencil or use a clickable thin eraser to make clean up lines in tight areas.
    • Yous can go over your dragon'due south outline with a pen or sparse marking before yous erase the guide lines to ensure yous don't remove whatsoever marks past accident. Let the pen or marking dry completely before erasing since it could smear.

11. 11

    Add scales if you want to make your dragon look realistic. Once you make clean up your cartoon, add minor curved or wavy lines inside the dragon's body to brand a calibration texture on its skin. Don't draw every single scale since it could make your drawing expect messy. Work lightly in pencil so you tin can erase the scales if they make your drawing visually confusing or if you desire to adjust the size of the scales.^[10]

    • You don't need to give your dragon scales if you don't want.
    • You may as well add spikes along your dragons back to add together more texture and particular.

12. 12

    Finished.

    Advertisement

1. 1

   Draw a circle with a curved jaw for your dragon'south head. Identify a circle near the top left side of your paper, making sure it's non too large or else the balance of the dragon won't fit on the folio. Connect a small curved trapezoid shape to the left side of the circumvolve to create a rough outline for dragon's snout.^[11]

   • Use a compass or trace around a circular object if you lot want to depict the circle perfectly.

2. 2

   Make 2 more circles of the aforementioned size below and to the right of the head. Position the start circumvolve below the caput so there's a minor gap between them. This first circumvolve will exist where you place the front end pair of legs. Place the second circumvolve to the correct of the circumvolve y'all just drew so it's the same distance away every bit the head'south diameter. Brand certain the center of the right circumvolve lines up with the top of the commencement circle you drew this step.^[12]

   • Y'all don't accept to describe perfect circles for the torso, but you lot can use a compass or circular object if you desire.
   • Identify the 2nd circle further away from the first one if you lot want your dragon to accept a long torso.

3. 3

   Sketch a curved tube to connect the head with the other circles. Outset a line at the top of the head and make an South-shaped curve downward toward the top of the first circle. Go on curving the line until it intersects with the top edge of the second circle. Repeat the process starting at the lesser of the head and making your curved line to the left side of the offset circumvolve. Continue extending the line until you reach the bottom of the second circle.^[13]

   • Eastern dragons have bodies similar to snakes, and so look at pictures of how a serpent curves its body for references.

4. 4

   Put a curved tube ending in a point coming off of the far right circle for the tail. Start from the pinnacle of the far right circumvolve and brand some other S-shaped bend going toward the right side of the page so it'southward the same length as the head to the kickoff circle. Then make a 2d line from the bottom of the circle and follow the same shape equally your first line. Taper the end of the tail until it comes to a betoken at the end. Your dragon volition now look like a long snake.^[xiv]

   • Y'all can brand the tail every bit long equally y'all want.

5. 5

   Add legs to the bottoms of the curves on the trunk. Draw a straight tube coming out from the center of the circumvolve at the front of the dragon's trunk that'due south as long every bit the circle'due south diameter and nigh 1-quarter as thick. Extend the tube down by the bottom of the circle before drawing a box for the dragons foot. Add together three-4 skinnier tubes that are about i-tertiary the length of the leg onto the sides of the box to make your dragon'southward claws. Draw the other front leg and the dorsum legs the aforementioned way.^[fifteen]

   • You don't have to describe the dorsum legs on your dragon if you don't desire to.
   • Your dragon's feet don't need to be flat on the ground since Eastern dragons are commonly drawn flying.

6. 6

   Draw long hair around the dragon'due south head and legs. Eastern dragons have pilus effectually their faces and the bases of their legs. Draw clumps of hair that stop in a point coming out from where the dragon's caput connects to its cervix. Then draw hair in the same mode around where the dragon's legs connect to the trunk for additional detail.^[16]

   • You tin brand the pilus every bit long or every bit short as you want.
   • You can besides sketch hair running downwardly the middle of the dragon'due south back if you want.

   Tip: Eastern dragons may as well take beards, so include some hair on the bottom of the cage if you want to.

7. 7

   Requite your dragon facial features. Start past drawing eyebrows on the front of your dragon's head the same mode y'all added the hair. Draw circles underneath the eyebrows for your dragon's eyes and put in circular pupils. Add a curved line running along the side of the muzzle to add the dragon'due south mouth, and draw a few abrupt teeth poking out from information technology. Then add sparse wavy tubes in a higher place the oral fissure coming out nearly the front of the dragon's cage to give it whiskers.^[17]

   • You may also choose to add knobby antlers coming out from the top of your dragon'due south head.
   • If you want to give your dragon ears, add oblong oval shapes to the sides of its head.

8. eight

   Erase the circles and other guidelines you drew to clean up your drawing. Go through your drawing with an eraser and get rid of any lines that aren't a role of your dragon'southward body, such as the circles on the torso or head. Be careful non to erase any of the details you added so y'all don't have to redraw them. Tip your paper upright to get rid of any eraser shavings when you're finished.^[xviii]

9. 9

   Add curved lines for scales down the length of your dragon's body. Make repetitive C-shapes that follow the curves of your dragon'due south body to add the scales. Describe the scales and then they're similar in thickness to your dragon's legs so information technology doesn't get visually messy. Keep working down the full length of the dragon's body until you've added all of the scales.^[19]

10. 10

    Finished.

    Advertisement

Add New Question

• Question

  How exercise I draw an ice dragon?

  

  Draw dragon #2, but instead of flames, draw mist with a light shade of gray and blueish. For the rest of the body, color it with unlike shades of blue and grey spikes.

• Question

  How practice I depict a nightwing from Wings of Fire?

  

  Tokayyoshi

  Community Answer

  Use the #2 model and requite it dark colors like blackness, deep purple, and very dark blue. Add argent or gray dots under the wings.

• Question

  How do I draw a better looking dragon?

  

  Often it is easier to go online and await at images of dragons for inspiration. If you want your dragon to await "clearer", try cartoon with pencil and newspaper, not on a computer.

• Question

  Is this a hard picture to draw?

  

  It might exist if you wonder near information technology instead of trying. Cartoon always seems difficult at outset and it is until you take expert information technology sufficiently. Requite information technology a go, don't worry nearly the first many attempts non working, every bit the process of trying is what matters and creates your drawing skills. If yous give upward before you lot even start, you'll never learn.

• Question

  How do I draw a lightening dragon?

  

  Describe dragon #2 with lightning around its wings, color it blue, and draw a lightning bolt instead of a flame

• Question

  How long will it take me to get the perfect dragon?

  

  Information technology will depend on your current skills and the corporeality of time your spend practicing.

• Question

  How should 50 make my baby dragon?

  

  Eve Wolvington

  Community Answer

  Endeavor making a baby dragon a flake smaller than an adult with proportionally larger optics, cheeks, and feet. Information technology might also help to draw very pocket-sized horns.

• Question

  Is there an easier way to draw a dragon's middle?

  

  Try drawing an oval with points on the sides instead of rounded edges. Inside the oval, draw a vertical line.

• Question

  How do yous draw Toothless from How To Train Your Dragon 1 and 2?

  

• Question

  How can I know the deviation between guidelines and parts of the dragon?

  

  Guidelines help you to draw the bodily dragon. The dragon is much more detailed than the guidelines, which may be blocked or random shapes that help you run across the actual dragon as it forms but aren't needed once the drawing is in identify.

Evidence more answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

• The color of your dragon can determine what surround it lives in or what powers it has. For example, a blue dragon may breathe ice while a red dragon would breathe fire.

• Await at pictures of real animals and use them for influences and references when you add together features to your dragon.

• Work lightly in pencil and then you can erase the marks if you brand a fault.

Cheers for submitting a tip for review!

Advertisement

Things Yous'll Need

• Paper
• Pencil
• Eraser

About This Article

Article Summary X

"To depict a dragon, beginning decide whether you desire to draw a cartoon dragon, which will take lots of simple curved lines, or a realistic dragon, which will accept more complicated angled lines. Then, choose whether you want your dragon to be breathing burn down, flight, continuing on two legs, or posing another style. When you're set up, sketch the frame of your dragon using basic shapes like circles and squares. Subsequently y'all make the frame, go dorsum in and add together details like scales, the optics, and the wings. "

Did this summary help you?

Thanks to all authors for creating a page that has been read ane,265,286 times.

Did this article help you?

adamealaire1939.blogspot.com

Source: https://www.wikihow.com/Draw-a-Dragon

Share this post